Harting 090043000 Cat.5 4 position Male with snap-in latch Crimp type for 0.13 to 0.82mm wire

Code: 09 10 004 3000

Cat.5 4 position Male with snap-in latch Crimp type for 0.13 to 0.82mm wire






Price on Application
Cat.5 4 position Male with snap-in latch Crimp type for 0.13 to 0.82mm wire

Identification
Category Insert
Series Han® 1A

Version
Termination method Crimp termination
Gender Male
Size 1 A Shielding With cable tie 
Number of contacts 4
further contacts + shielding
Locking type Snap-in latches
Details Please order crimp contacts separately.
Order separately the hoods/housings for an IP65 performance.
Contact insert not compatible with 09 10 000 0800 (bulkhead mounted housing, angled)
Details A Han®
 1A configuration that only consists of inserts (with or without strain relief, 09 10 000 5300) is an unenclosed connector. In this case protection against electric shock must be provided by the installation methods of the user.
Contact inserts must not be coupled or decoupled under electrical load.
Contact inserts must not be powered-up in the un-mated conditions

Technical characteristics
Conductor cross-section 0.13 ... 0.82 mm²
Rated current ‌ 4 A
Rated voltage 48 V AC 60 V DC
Rated impulse voltage 1.5 kV
Pollution degree 3
Transmission characteristics Cat. 5 Class D up to 100 MHz
Data rate ‌ 10 Mbit/s ‌ 100 Mbit/s
Insulation resistance >108  Ω
Limiting temperature -30 ... +90 °C
Mating cycles ≥ 10
Degree of protection acc. to IEC 60529 IP20

Material properties
Material (insert) Polyamide (PA)
Colour (insert) RAL 9005 (jet black)
Material flammability class acc. to UL 94 V-0
RoHS compliant
ELV status compliant
China RoHS e
REACH Annex XVII substances Not contained
REACH ANNEX XIV substances Not contained
REACH SVHC substances Not contained
Fire protection on railway vehicles EN 45545-2 (2020-08)
Requirement set with Hazard Levels R22 (HL 1-3) R23 (HL 1-3)

Specifications and approvals
Specifications EN 45545-2 R22: HL1, HL2, HL3
EN 45545-2 R23: HL1, HL2, HL3
EN 45545-2 R24: HL1, HL2, HL3
IEC 61373 Category 1 Class B EN 60664-1
Approvals
DNV GL